More progress - no pictures

So I made some more progress, but did not take pictures.  I will once I put it back together again...

This business travel is really eating into my car building time - but, it pays the bills...  Travel again next week - Ugh!

• I mounted the engine again and moved the radiator mounts forward to accommodate.
• Installed the new Mishimoto Radiator, with dual fans in a puller setup (mock up only at this point).
• Moved the A/C condenser mounting tabs forward (mock up).
• Ordered a FM sway bar - we'll see what adjustments I need to make when it arrives

• Removed the engine again
• Fabbed up a shift lever for the stock T56 to mount the Miata shift ball
• Used a piece of 3/16x1 bar stock, 3 1/2 inches long, drilled holes and welded a metric stud to it - painted it (all scrap stuff that I had laying around), so if it doesn't work out - nothing lost...
• Stripped the Miata ECU wiring from the chassis wiring (praying I didn't totally screw something up).
• Drilled hole in Firewall for the PCM wires to traverse - I am going to mount the PCM in the passenger floor (up front).  I will use a seals-it split firewall grommet to finish and protect the wires.

I am going to try a home-made lizzard skin.  1 gallon kool seal roofing elastomeric, with 1 QT ceramic spheres from these folks http://www.hytechceramics.com/

Back at it next week...  Pictures promised.